12th September 2025
Blog 10/12
For many machine builders and OEMs, keeping manufacturing and assembly in-house feels like the safest route. But beneath the surface of familiarity lies a growing burden – one that quietly limits capacity, slows innovation, and drains critical resources.
In this new campaign series, The Hidden Cost of In-House, we uncover the operational pain points that often go unspoken but have a lasting impact on business performance. From skills shortages and missed delivery windows to bottlenecks in engineering and rising quality issues, each article reveals a hidden cost and shows how strategic outsourcing can eliminate it.
This 12-part quickfire blog series challenges conventional thinking. It invites OEM leaders to step back and re-evaluate what “in-house” is really costing them – not just in terms of money, but in missed opportunity, agility, and growth.
Because outsourcing has nothing to do with losing control. It’s about regaining focus. It’s about building smarter, scaling faster, and staying competitive, no matter what challenge is chucked in for good measure.
For many machine builders and OEMs, innovation starts strong. Engineering teams develop groundbreaking designs, customers get excited about new capabilities, and the business positions itself to deliver a competitive edge. But then comes the challenge: moving from concept to production. The transition from design to manufacture is where delays, bottlenecks, and hidden costs often appear – and for businesses keeping everything in-house, this stage can quietly erode both timelines and margins.
The problem isn’t the design itself; it’s the capacity to translate it into a repeatable, efficient manufacturing process. Internal teams are already stretched delivering current production schedules. Introducing a new product often means disrupting existing workflows, retraining operators, and adapting test procedures – tasks that take time and resource many OEMs simply don’t have. As deadlines slip and engineering is pulled back into constant troubleshooting, the benefits of innovation can be undermined before the product even reaches the customer.
Compounding the issue is the increasing complexity of modern machines. Advanced controls, digital connectivity, and integrated systems demand higher levels of precision and multidisciplinary expertise. Without the right processes and dedicated resource, the ramp-up to manufacture can become slow, error-prone, and costly. Internal teams may end up firefighting unplanned issues rather than optimising performance, leaving little room for continuous improvement.
Strategic outsourcing offers a way to bridge this gap. By partnering with a manufacturing specialist, OEMs can accelerate the transition from design to delivery without overloading internal teams. Outsourcing partners can manage pilot and NPI builds, optimise assembly processes, create robust test regimes, and integrate lessons learned directly into volume production. This approach ensures quality and repeatability from the outset, whilst freeing engineering teams to focus on refinement and innovation rather than reactive problem-solving.
Outsourcing also provides access to specialised facilities and expertise that many OEMs lack internally, such as advanced electrical integration, clean assembly environments, and automated cable harness manufacture and testing. These capabilities vastly improve manufacturing efficiency and importantly; they reduce risk, shorten lead times, and enhance overall customer satisfaction.
Brilliant designs deserve to be manufactured brilliantly. Yet too often, the weight of in-house production constraints slows progress and dilutes impact. By working with a trusted partner from the earliest stages, OEMs can ensure that new products are designed not just to work, but to be built efficiently, consistently, and at scale.
Innovation doesn’t stop at the drawing board. It’s realised on the shop floor. And with the right outsourcing strategy, the journey from idea to implementation doesn’t have to be the bottleneck that holds back growth.
If you enjoyed this quickfire blog, there’s 11 more in the Hidden Cost of In-House series, and compiled into a downloadable illustrated e-book.
Download the e-book using the button below or add it to your resource basket and browse more informative guides and collected stories in the Resource Centre.
For many machine builders and OEMs, keeping manufacturing and assembly in-house feels like the safest route. But beneath the surface of familiarity lies a growing burden… All stories from the Hidden Cost of In-House series compiled with illustrations.
Add to basket
In your basket
Hidden Cost of In-House 12/12: In machine building, success depends on where you direct your time, energy, and expertise. Yet for many OEMs, the focus has shifted away from where it creates the most value.
Hidden Cost of In-House 11/12: For many machine builders and OEMs, keeping production in-house feels like the most cost-effective way to operate. But when you dig deeper, the numbers often tell a different story.
Hidden Cost of In-House 10/12: For many machine builders and OEMs, innovation starts strong. But then comes the challenge: moving from concept to production.
Hidden Cost of In-House 9/12: In modern machine building, supply chains have become increasingly fragmented. And for many OEMs, managing these relationships has turned into an operational burden.
Hidden Cost of In-House 8/12: For many machine builders and OEMs, the opportunities have never been greater. Yet whilst the possibilities grow, many manufacturers are constrained by what’s happening much closer to home.
Hidden Cost of In-House 7/12: Machine builders are under constant pressure to innovate. Customers want smarter, faster, more integrated systems. But as products evolve, production demands do too.
Hidden Cost of In-House 6/12: For many machine builders and OEMs, a growing order book should be a cause for celebration. But too often, it brings the opposite feeling – pressure, panic, and the looming risk of letting customers down.
Hidden Cost of In-House 5/12: Every machine builder knows that quality is a reputation-maker or breaker. But as production complexity grows and internal pressures rise, many OEMs find themselves slipping into a reactive mode. Quality control becomes damage control.
Hidden Cost of In-House 4/12: Technical skill is the lifeblood of any machine builder. But across the sector, that capability is under threat.
Hidden Cost of In-House 3/12: For many OEMs, firefighting has become business as usual. But it’s also a major reason why forward planning never quite gets off the ground.
Ian Knight, Chief Information Officer at PP Control & Automation (PP C&A) challenges the prevailing, often vague narrative around AI adoption and reframes the conversation around a more practical starting point: operational constraints.
Artificial intelligence is no longer a distant concept for manufacturers. It is already being explored across quotation, production planning, engineering, quality, supply chain and customer service functions. Yet, for many organisations, the gap between experimentation and meaningful operational impact remains difficult to close.
A leading aquaculture specialist – that is changing the way fish are vaccinated safely – has signed a major manufacturing deal.
On paper, defined discipline-specific suppliers can look organised. However, every additional supplier introduces another handoff, and every handoff creates another point where time, quality, communication and accountability can be lost.
Very rarely does growth not surface because an OEM lacks ambition. Shortcomings arise because operating models built to support such ambition don’t evolve quickly enough.
Recent weeks have brought two important industry moments into sharp focus, concluding that demand for AI and automation is rising, but investment, skills, and long-term thinking must follow.
For decades, one question has sat at the heart of operational strategy for machine builders and OEMs: make or buy? It’s a familiar debate and it isn’t the wrong question by any means, but perhaps it is an incomplete one.
In most machine building businesses, change is still treated as an exception. A late-stage drawing revision, component substitution, or wiring tweak discovered during build. Each one is handled, resolved, and signed off. And then everyone moves on. But what if that’s the wrong way to think about it? What if change isn’t the disruption to the system but the system itself?
